Code : B0073YCGK8
Category : ,
Rating :
See more images Whirlpool WMH31017AS 1.7 Cu. Ft. Stainless Steel Over-the-Range Microwave : Here
Whirlpool WMH31017AS 1.7 Cu. Ft. Stainless Steel Over-the-Range Microwave
Whirlpool WMH31017AS 1.7 Cu. Ft. Stainless Steel Over-the-Range Microwave
Search Result
Product Details
- Amazon Sales Rank: #667 in Major Appliances
- Color: stainless steel
- Brand: Whirlpool
- Model: WMH31017AS
- Dimensions: 17.25" h x 29.94" w x 16.13" l, 65.00 pounds
Features
- 1,000 Watts Cooking Power
- Hidden Vent
- 2-speed Fan/220 Cfm
- Dimensions (WHD): 29 15/16" X 17 1/4" X 16 1/8"
- 1,000 Watts Cooking Power
- Hidden Vent
- 2-speed Fan/220 Cfm
- Dimensions (WHD): 29 15/16" X 17 1/4" X 16 1/8"
Product Description
Customer Reviews
Most helpful customer reviews
18 of 18 people found the following review helpful.
Best Bang for the Buck out there!
By Earle Bubar
Bought this at Christmas time to replace a GE Conv/Micro that cost $1200. This is the slickest microwave you could imagine. Works great and heats faster than the old GE; that cost 5 times more. If you want a SS Microwave, to go over your stove, and dont want to break the bank, I couldnt say enough about this one. It works flawlessly, and performs with the best of them.With that said, I was very disapointed with the limited manual that comes with it, and owned it for a month, before I realized that that 99% of the info, that I was looking for, is on a label INSIDE THE DOOR JAM ?????????????????? There is NO MENTION of that fact in the manual; And all the codes, and info, I was searching for is printed right there on the bottom of the door jam; IF you know where to look for it!! So in closing this is a run to buy it purchase; and you will not be disapointed in the unit in anyway . Read all the codes inside the doorjam on the bottom and life will be good for you !!!!Excellent plus on this unit.
26 of 30 people found the following review helpful.
Great value, excellent performance. A bit difficult to install.
By Kraziken
Our over the range microwave died suddenly in our new home. I was not the original purchase of this particular appliance, and it was over 10 years old.So I began looking for product replacement. I found a Whirlpool model online that had some nice ratings, but when I went to my local big box store to purchase, they didn't have the exact Whirlpool model I had read about. What I found, was this model, which I assume is the newest version.The microwave has a very nice finish. The door and front feel fairly sturdy.Operation is simple. I tend to hate overly complex controls. I want power and simple controls. This microwave meets my needs in this regard. This microwave has lots of power.Now the bad. The install. This is my second microwave install. My first being a retrofit of an over the range fan.My first install, and noticing the hardware of my current broken microwave. The units are mounted by a rear wall bracket that holds the bottom part of the microwave. And the top of the microwave is held by a couple of suspension bolts fixed to the cabinet. The USUAL location of these bolts are the two front corners of the microwave.The rear bracket is usually the same size/shape as the rear of the microwave. This makes it fairly easy to just place the bracket on the rear wall and push up until the bracket touches the cabinet. No measurement really necessary. This Microwave has a small bar hanger. So you'll need to be very accurate with a measuring tape to figure out where the bottom of the Microwave will sit against the wall.I tend to not trust myself in this regard. So I taped the bracket to the bottom of the microwave. Held the microwave up against the wall, and had a helper draw a marking line with a pencil.The second negative. Usually the suspension bolts are at the front corners of the microwave. In mounting position, my current defective microwave has bolts in the corners. I could have taken the other microwave from my other house and I suspect the holes are in the same position.On this microwave, one bolt is about 3 inches in from the edge (which is slightly offset). The second bolt is about 7 inches in so it is offset quite a bit. Both holes did not line up with my current microwave mounting holes. So to mount this microwave I had to drill new holes in my cabinet.So take this into consideration. I bought my unit as a floor model return. I suspect it was returned for this very reason.Otherwise I've been happy with this purchase so far.
9 of 10 people found the following review helpful.Great Microwave with Easy to Use Features
By T3ch5upp0rt
This microwave came with my new home and overall, I am very pleased with it. It is sturdily-built and has an attractive stainless steel finish and design. It does a great job at heating up and cooking food, and even though it may not have all of the features of a more expensive microwave, the features it does have, work well. I particularly like the turntable and the "add 30 seconds" button. The only downside I can think of is that it does not have the "express" 1 minute, 2 minute, etc. buttons. When it comes to a microwave, simplicity in use is key and this one definitely fits the bill.
{ 0 comments... read them below or add one }
Post a Comment